Breckwell Pellet Fireplace Insert Tahoe SP2000I
The Tahoe Pellet Fireplace Insert Breckwell SP2000I has a Flue Size of 3 inches.
The Breckwell Pellet Fireplace Insert Tahoe SP2000I has a Fuel Burn Rate of 1.0 - 5.5 lbs/hour.
The Pellet Fireplace Insert Tahoe SP2000I by Breckwell Tahoe SP2000I Pellet Fireplace Insert has a Burn Time of up to 55 hours.
The SP2000I Tahoe Pellet Fireplace Insert by Breckwell has a Max of 50,000 BTU's.
EPA Status for the Breckwell Tahoe Pellet Fireplace Insert SP2000I is exempt.
The SP2000I Breckwell Tahoe Pellet Fireplace Insert has a Hopper Capacity of 55 lbs.
Dimensions for the SP2000I Tahoe Breckwell Pellet Fireplace Insert include:
Width - 22" (at rear), 28.5" (at opening)
Depth - 25 3/4" (including ash lip)/16 3/8" (in fireplace)
Height - 19 1/2"
Flashing sizes for the Tahoe SP2000I by Breckwell include: (W x H) - 40 1/2" x 28" (small), 44 1/2" x 30" (medium), 48 1/2" x 32" (large).
Clearances for the Tahoe SP2000I Breckwell Pellet Fireplace Insert include:
Front (hearth) - 6"
Side - 9"
Mantel (from stove) - 12"
The Tahoe Breckwell SP2000I Pellet Fireplace Insert is approved for Masonry, Zero-clearance, Mobile Home, and Built-In installations.
Warranty Registration Form
Manufacturer's Limited
Lifetime Warranty
The Manufacturer
warrants to the original consumer purchaser that the Breckwell pellet stove in
its original installation is free from defects in material and workmanship from
the original date of purchase as follows:
TIME PERIOD
A) Steel Fabricated Components
(Excluding Burn Pot Insert) - Five Years
B) Glass and Burn Pot
Insert (For Thermal Damage Only) - One Year
C) Electrical Components
(Control Panel, Auger Motor, Combustion/Convection Blowers, Igniter,
Thermodisc, Air Switch) - One Year
After expiration of the
original warranty period, any components may be purchased at 10% discount off
manufacturers suggested list price plus shipping and handling charges, as long
as the original consumer purchaser owns the product.
NOT COVERED
Specifically not covered
under the terms of this limited lifetime warranty or any other warranty, are
problems related to smoke or creosote. Smoking is attributable to
inadequate draft due to poor design of the flue system or incorrect
installation of the flue system or improper installation of the heater itself.
Also not covered are:
1) Removal and re-installation
costs.
2) Service calls for
diagnosis or warranty replacement.
3) Gaskets.
4) Painted or Plated
Surfaces.
5) Damage or defects
caused by improper installation, improper maintenance, misuse, abuse,
alteration, accidents, or circumstances beyond The Manufacturer’s control
including but not limited to acts of nature.
6) Transportation or
shipping costs.
LIMITATIONS AND
EXCLUSIONS
The Manufacturer will
not be liable for consequential or indirect damages to property or persons
resulting from use of this product. No other express warranty given and no
affirmation of The Manufacturer or its agents by work or action shall
constitute a warranty.
This warranty covers
defect in materials and workmanship in covered components provided this product
has been properly installed and operated strictly in accordance with the
instructions in this owner’s manual and all applicable local codes. This
warranty does not cover damage or breakage caused by improper handling, misuse,
abuse, over-firing, disassembly, unauthorized modification or other
circumstances beyond The Manufacturer’s control. Installing non-Breckwell
components onto the unit would be considered unauthorized modification and will
void all warranties.